Diagnose right in your browser — plug in an ELM327 and the site reads your car itselfProgram for Windows and macOS — all-module scan on any make

Mini R56 (2006–2013) — Diagnosis

The table below is the real diagnostic profile the Diagnost program uses for the Mini R56 (R55–R59) — every unit it polls, reads fault memory from and (where marked) codes. This is not marketing: it is the program's working database.

Control units read on the R56

UnitSystemCoding
CASAccess / immobiliser (CAS)
KOMB56Instrument cluster
D_MOTOREngine (auto-detect)
D_EGSAutomatic transmission (auto-detect)
mev17_2Engine N12/N16 (Cooper)
med17_2Engine N14 (Cooper S)
mvd1722Engine N18 (LCI)
EGSAutomatic transmission
DSC_56Brakes / ABS
FRM_87Lights (FRM, pre-facelift)
frm3Lights (FRM3, LCI)
ACSM2airbag
IHKA56Climate control (auto)
IHKS56Climate control (manual)
EPS_56Electric power steering
SZL_56Steering column
SZLSteering column (generic)
ZBE_56iDrive controller
cvm_57Convertible top (R57)
AMPH56Audio amplifier
amphh2Audio amplifier (hifi)
champ2Audio CHAMP2
CMEDIARCombox
RAD1
rad12
RAD2

Have a problem with your R56?

Describe the symptoms or paste the codes — the AI knows this chassis' typical weak points.

Start diagnosis

Fault memories on this car (if it has a CAN bus — roughly 2008 and newer) are read by the program with an ordinary ELM327 adapter too. A K+DCAN cable (E series) or ENET cable (G series) in the Windows version is what unlocks dealer-level depth: coding, service intervals, factory options, per-module mileage and the full fault list for every unit in the table above.