Diagnose right in your browser — plug in an ELM327 and the site reads your car itselfProgram for Windows and macOS — all-module scan on any make

BMW X3 E83 (2003–2010) — Diagnosis

The table below is the real diagnostic profile the Diagnost program uses for the BMW X3 E83 — every unit it polls, reads fault memory from and (where marked) codes. This is not marketing: it is the program's working database.

Control units read on the E83

UnitSystemCoding
D_MOTOREngine (auto-detect, incl. diesels)
D_EGSAutomatic transmission (auto-detect)
ms430ds0Engine M54 (2.5i/3.0i)
MSV70Engine N52 (LCI 2.5si/3.0si)
MSV80Engine N52N
EGSAutomatic transmission
GS19Automatic transmission
dxc_83Brakes / ABS (facelift 09/06+)
DXC8Brakes / ABS (pre-09/06)
lm2_83Lights (LM2)
LSZLights (switch)
ihka83Climate control (E83)
mrs4rdairbag
EWSEWS immobiliser
ews3EWS immobiliser
svt_83Servotronic
rad_83Radio
alc_ds2ALC
ekp_ds2Fuel pump
EKPM60_2Fuel pump
lws5Steering angle sensor
rdcTyre pressure (RDC)
ulfBluetooth
vgsg83Transfer case ATC400/500

Have a problem with your E83?

Describe the symptoms or paste the codes — the AI knows this chassis' typical weak points.

Start diagnosis

Fault memories on this car (if it has a CAN bus — roughly 2008 and newer) are read by the program with an ordinary ELM327 adapter too. A K+DCAN cable (E series) or ENET cable (G series) in the Windows version is what unlocks dealer-level depth: coding, service intervals, factory options, per-module mileage and the full fault list for every unit in the table above.